-
E50 – CONIC
Eurobelt Series E50 Conic has a smooth surface with small pyramidal-shaped elevations that provide a greater coefficient of friction, as well as they avoid the slippery products to change their position during the conveyance.
-
E50 – FLAT TOP
Eurobelt Series E50 Flat Top, due to its closed surface, completely flat and smooth, avoids any damage and overturn in the product, as well as the resulting line blockage.
It is the conveyor belt most commonly used in elevating conveyors for products in bulk, and in delicate product conveyance. -
E50 – FLIGHTS AND SIDE GUARDS
The flights are plastic accessories to be inserted across the belt. They are used to push the product in ascent, descent or accompaniment applications, avoiding that it slips along the belt.
The side guards are plastic accessories to be inserted into the belt structure to retain the product laterally, avoiding overflows and frictions with the conveyor structure itself.
It is possible to cut down the standard height for special applications.
Materials: Polypropylene – Polyethylene
-
E50 – FLUSH GRID
Eurobelt Series E50 Flush Grid has a grille-shaped configuration, with a 40% open area, and a completely smooth surface.
It is ideal for applications in which there are a lot of debris of the conveyed product, as their removal is very easy by means of air or water under pressure.
It is specially recommended for cooling and freezing tunnels. -
E50 – KNURLED
Eurobelt Series E50 Knurled has a flat-corrugated surface that has been designed to prevent the conveyed product from adhering to the belt. Due to its corrugated surface, it is used in slightly inclined conveyors as well.
-
E50 – OPEN GRID
Eurobelt Series E50 Open Grid, with a grille-shaped configuration, and a 40% open area, is suitable for applications in which drainage through the belt is required.
We have accomplished an exclusive design of this conveyor belt consisting of two transverse projections in the middle of every pitch to achieve the product do not adhere to the belt.. -
E50 – PERFORATED
Eurobelt Series E50 Perforated Flat Top has an 18% open area, a completely smooth surface, and grille-shaped small straight holes without structural obstacles, to make easy the drainage of any liquid.
The dimensions of these holes, in millimetres, are:
[1.8 x 6], [2 x 9] and [2 x 15]. -
E50 – SLIDING ROLLERS
Eurobelt Series E50 Sliding Rollers is provided with small rollers inserted on its surface that rotate around themselves whenever there is product accumulation, avoiding crushing and wear in the base of the product.
This conveyor belt has been designed mainly to solve problems of conveyance of boxes, containers, etc. -
SERIES – E50 – CONIC FRICTION
Eurobelt Series E50 Conic Friction is a conveyor belt with modules made in rubber which are inserted among the rest of modules of the belt in order to obtain good friction mechanical properties in applications which require so.
These rubber modules have pyramidal-shaped projections which enable to carry out elevating and/or descending conveyors with maximum inclinations.
WELCOME TO BKPPASS CO.,LTD.|
0-2918-2977-78 |CONTACT US
© Copyright 2011-2024. All Rights Reserved.