-
A24 – FINGER PLATES
-
A24 – FLIGHTS AND SIDE GUARDS
STRAIGHT FLIGHT [STREAMLINE + NO CLING]
Height (h):
25 mm
50 mm
SIDE GUARDS
The side guards are plastic accessories to be inserted into the belt structure to retain the product laterally, avoiding overflows and frictions with the conveyor structure itself.
Height (h):
50 mm
-
A24 – SPROCKETS
We also have sprockets to be used with motor drum in applications needing a special cleaning or in conveyors in which it is not possible to place the motor in the outside due to problems of space or safety.
To calculate the necessary minimum quantity of sprockets for the drive shaft as well as for the idle one, the next formula has been used:
This quantity must always be odd.
-
B50 – FLAT TOP
Eurobelt Series B50 Flat Top is the most hygienic and strongest conveyor belt for the food industry. Thanks to its design of completely rounded corners and open edges we avoid the accumulation of debris.
The underside transversal drive bar and the sprockets design make this belt be the best alternative for longer conveyors with heavier loads.
It is recommended for sorting and inspection tables, cut and quartering lines, selection tables, receiving hoppers, etc. -
B50 – FLIGHTS AND SIDE GUARDS
The flights are plastic accessories to be inserted across the belt. They are used to push the product in ascent, descent or accompaniment applications, avoiding that it slips along the belt.
• Its non-stick side has ribs that project over the surface to prevent the product from sticking.
• Their edges are completely rounded to avoid any damage of the product.It is possible to cut down the standard height for special applications.
Materials: Polypropylene – Polyethylene – Polyacetal
-
B50 – FLUSH GRID
SERIES – B50 – FLUSH GRID
Pitch = 50 mm
• Open area = 28%
• Maximum opening = [11.6 x 10.4] mm
• Thickness = 16 mm
• Rod diameter = Ø 5.5 mm
-
B50 – PERFORATED
Its smooth perforated surface allows the air to flow and the liquids to drain away.
It is the ideal belt for production food processes (boiling, draining, drying) as well as for preservation processes (sterilization, refrigeration).
Its design of totally rounded edges and its greater opening in the joint area make easier the water draining as the belt is cleaned which reduces to the minimum the waste accumulation. -
B50 – SPROCKETS
-
Bar Caps 14BC
-
Bar Caps 38BC
-
Bar Caps 3BC
-
Bar Caps 4BC
WELCOME TO BKPPASS CO.,LTD.|
0-2918-2977-78 |CONTACT US
© Copyright 2011-2024. All Rights Reserved.